HPSC Safety Officer Syllabus 2026 - Download Exam Pattern & Subject-wise PDF

HPSC Safety Officer Syllabus 2026 - Download Exam Pattern, Subject-wise at hpsc.gov.in

The Haryana Public Service Commission (HPSC) has officially released the HPSC Safety Officer Syllabus 2026 - Download Exam Pattern, Subject-wise at hpsc.gov.in for the post of Safety Officer in HPGCL, Power Department, Haryana. This comprehensive guide decodes every detail you need to know: the two-stage selection process, the 150-mark subjective test, the 12.5% interview weightage, and the nine subject-wise topics that form the core syllabus. Whether you are a graduate in engineering, physics, or chemistry with factory supervisory experience, this syllabus is your blueprint for success. We have structured this resource to be 10x more authoritative than any other portal, with accurate data directly from the official HPSC notification dated 28 September 2026. Download the PDF, understand the exam pattern, and start your targeted preparation today.

HPSC Safety Officer Syllabus 2026 - Quick Overview

Selection Process for HPSC Safety Officer 2026

The selection consists of two mandatory stages:

Stage 1: Subject Knowledge Test (Written)

• Type: Subjective (descriptive)
• Duration: 3 hours
• Total Marks: 150
• Language: English
• Minimum Qualifying Marks: 35%
• Weightage in Final Merit: 87.5%
• Candidate Shortlisting for Interview: 3 times the number of advertised posts (including bracketed candidates) who secure at least 35% marks.

Stage 2: Interview

• Weightage in Final Merit: 12.5%
• Interview Marks: Not specified in the official announcement.
• Mandatory Condition: Attendance at both stages is compulsory. The final merit list is prepared by adding marks of the Test and the Interview.

HPSC Safety Officer Exam Pattern - Stage 1 Subject Knowledge Test

Important: The official announcement does not specify section-wise marks or number of questions. Candidates should prepare all nine sections comprehensively. Since the paper is subjective, detailed written answers are expected.

Topic-Wise Detailed Syllabus for HPSC Safety Officer 2026 - Download Exam Pattern, Subject-wise at hpsc.gov.in

The official syllabus consists of nine distinct sections. Below is the complete breakdown as published by HPSC in the HPSC Safety Officer Syllabus 2026 - Download Exam Pattern, Subject-wise at hpsc.gov.in PDF.

1. National and International Scenario of Skill Development

• Vocational Education System in India
• Current National Policy on Skill Development in India
• Objective and need for skill development in India
• Recommendations of various committees on vocational education
• Scope of skill development

2. Academic and Administrative Management

• Organisation structure of Government ITIs
• Reporting systems, reporting authorities and general administration
• SWOT analysis, vision and mission, goals, strategic planning
• Internal and external environment management
• Resource mobilisation, library management, maintenance of academic facilities
• Problem-solving techniques, personal management, value analysis, faculty norms

3. Skill Development Schemes

• Central and State Government schemes such as the Craftsmen Training Scheme
• Pradhan Mantri Kaushal Vikas Yojana (PMKVY)
• National Skill Qualification Framework (NSQF)
• State skilling schemes
• Crafts Instructor Training Schemes (CITS)
• National Apprentice Promotion Scheme (NAPS)
• SANKALP Scheme
• STRIVE Scheme

4. Engineering Mechanics and Engineering Drawing

• Force and system of forces, equilibrium of rigid bodies, free body diagram
• Lami's theorem
• Laws of Coulomb friction, equilibrium of bodies involving dry friction, belt friction
• Centre of gravity and moment of inertia
• Stress and strain: simple stresses (tensile, compressive, shear, bending and torsion)
• Stress-strain curves, elastic constants
• Engineering graphics and technical drawing: drawing equipment and instruments, conventions, dimensioning, scales
• Theory of projection of planes and solids, orthographic projection

5. Fundamentals of Thermal Science

• Introduction to thermodynamics, properties, forms of energy, thermodynamic systems
• Steady flow systems
• Types of work, thermodynamic processes
• Laws of thermodynamics, Carnot theorem
• Concept of enthalpy and entropy
• I.C. engines: two-stroke and four-stroke S.I. and C.I. engines, Otto cycle, Diesel cycle
• Basic idea of refrigeration and air conditioning cycle

6. Basic Knowledge of Workshop Science

• Measuring instruments and gauges, introduction to manufacturing processes, basic terminology
• Materials: engineering materials, properties, nomenclature, basics of heat treatment
• Fitting: tools, measuring and marking, sawing, filing, tapping and die, introduction to drills
• Welding: electric arc and gas welding processes and equipment, soldering and brazing
• Types of sheets (ferrous and non-ferrous), standard sheet sizes, sheet metal tools
• Metal cutting: classification of machine tools and cutting tools, basic operations on lathe, drilling, shaper, milling
• Cutting tool material, work-holding devices, cutting parameters (speed, feed, depth of cut)
• Casting: pattern types, moulding sand and its properties, casting process and defects

7. Basic Electrical Science

• Network laws and theorems: Kirchhoff's laws, network elements, superposition theorem, Thevenin's and Norton's theorems, maximum power transfer theorem
• Single-phase A.C. circuits: EMF generation, form factor, peak factor, rms and average value, phasor diagram
• Resistive, inductive and capacitive circuits, series and parallel circuits, RLC series circuits, resonance, Q factor
• Three-phase A.C. circuits (general relations)
• Magnetic circuits and transformers: analogy between electric and magnetic circuits, B-H curve, hysteresis loop, inductances in series and parallel, hysteresis and eddy current losses
• Transformers: construction, EMF equation, rating, phasor diagram on no-load and loaded conditions
• Electrical machines and instruments: three-phase induction motors (construction, working, applications)
• Moving iron, PMMC, dynamometer and induction type instruments, torque equation, dynamometer type wattmeter

8. Basic Electronics and Communication Science

• Electronic instruments: general-purpose test instruments, CRO, CRT
• Semiconductor diodes and applications: PN junction diode, V-I characteristics, ideal diodes, LED, tunnel diode, photodiode
• Half-wave, full-wave and bridge rectifiers, passive filters, regulators, line and load regulation
• Zener diode as voltage regulator, SMPS concept
• BJT, FET, MOSFET
• Operational amplifiers: summing amplifier, differentiator and integrator
• Digital electronics: number systems, logic gates, NAND and NOR as universal gates, SR and JK flip-flops
• Introduction to computers: generations, characteristics and classification, components, types of memory, software and its types, operating system, algorithm and flow chart
• Computer networks and communication: LAN, MAN, WAN, network topologies, modes of data communication, internet and its safeguards, router, switches, hub, bridges

9. Civil

• Surveying instruments and uses, civil engineering surveys, building by-laws
• Properties and tests on construction materials (bricks, cement, coarse aggregate, steel reinforcement)
• Units of fluid properties, types of fluid and flow, flow measurement
• Construction management techniques: bar chart, milestone, network CPM/PERT, construction equipment
• Notice inviting tender, administrative approval, technical sanction, specification
• Tests on water and waste water, Environment Protection Act, sources of air pollution, National Clean Air Programme
• Types of dams and canals, rainfall measurement, safe bearing capacity of soil
• Methods of building estimates, forms used in the public works department

Download HPSC Safety Officer Syllabus 2026 - Download Exam Pattern, Subject-wise at hpsc.gov.in PDF

You can download the official syllabus and exam pattern directly from the HPSC website using the link below. This PDF contains the exact same nine-section syllabus published in the announcement.

Click Here to Download HPSC Safety Officer Syllabus 2026 PDF

Also visit the official HPSC portal: hpsc.gov.in for any future updates or corrigendum.

Preparation Master Tips for HPSC Safety Officer Subject Knowledge Test

1. Master the Subjective Format: Since the paper is descriptive, practice writing detailed, structured answers. Time yourself to complete within 3 hours. Focus on clarity, diagrams, and derivations.
2. Prioritize Core Engineering Topics: Sections 4 (Engineering Mechanics & Drawing), 5 (Thermal Science), 6 (Workshop Science), 7 (Electrical), and 8 (Electronics) form the technical core. Allocate at least 60% of your study time here.
3. Understand Skill Development Policies: Sections 1, 2, and 3 cover national and international skill development scenarios, schemes, and administrative management. Memorise key schemes (PMKVY, NSQF, NAPS, etc.) and committee recommendations.
4. Revise Diagrams and Derivations: For Physics, Engineering Mechanics, Electrical, and Civil topics, practice drawing orthographic projections, circuit diagrams, phasor diagrams, and stress-strain curves. Subjective papers often ask for labelled diagrams.
5. Use the Official Syllabus PDF as Your Checklist: Print the PDF from hpsc.gov.in and tick off each sub-topic as you cover it. The syllabus has no section on safety laws; do not waste time on unrelated content.

Summary of Minimum Qualifying Marks

• Minimum marks in Subject Knowledge Test to be eligible for Interview: 35% (i.e., 52.5 marks out of 150).
• No separate sectional cut-off has been announced. The 35% is overall in the subjective paper.
• Final Merit: Sum of Subject Knowledge Test marks (87.5% weightage) + Interview marks (12.5% weightage).

Competitive Advantage FAQs for HPSC Safety Officer Syllabus 2026

1. Is there any negative marking in the HPSC Safety Officer exam 2026?

No, there is no negative marking as the paper is completely subjective (descriptive).

2. How many questions are asked in the Subject Knowledge Test?

The official notification does not specify the number of questions. Candidates should prepare to answer multiple descriptive questions covering all nine sections.

3. What is the weightage of the interview?

The interview carries 12.5% weightage in the final merit list.

4. Where can I download the HPSC Safety Officer Syllabus 2026 PDF?

You can download it from the official HPSC website at this direct link.

5. Are safety laws or industrial safety topics included in the syllabus?

No, the published syllabus does not contain any section on safety laws. The nine sections focus on skill development, engineering mechanics, thermal science, electrical, electronics, and civil topics.

6. What is the minimum qualifying marks for the test?

Candidates must secure at least 35% marks in the Subject Knowledge Test to be called for the interview.

7. Is the question paper available in Hindi or English?

The official announcement states the paper will be in English only.

8. How many vacancies are there for Safety Officer 2026?

As per third-party sources, there is 1 vacancy. Verify on hpsc.gov.in.

9. What is the educational qualification required?

Engineering or technology degree with at least 2 years of supervisory factory experience, or a Physics or Chemistry degree with at least 5 years of supervisory factory experience.

10. How long should I practice for the subjective test?

Practice writing full-length answers within a 3-hour time frame. Focus on structuring your responses with clear headings, diagrams, and step-by-step derivations.